- #NITRO READER 5 INSTRUCTIONS HOW TO#
- #NITRO READER 5 INSTRUCTIONS INSTALL#
- #NITRO READER 5 INSTRUCTIONS UPGRADE#
- #NITRO READER 5 INSTRUCTIONS SOFTWARE#
If you simply added an M.2 SSD to complement the 2.5-inch HDD, you can now go ahead with any cloning of the boot drive. You can now cross your fingers and boot up your Acer Nitro 5. Screw in the fasteners that hold the panels in place.
Be sure that the plastic teeth are seated properly. Replace the two easy-access panels by applying pressure. Screw in the four fasteners on the 2.5-inch storage mount. Screw in the 15 fasteners on the back panel. Make sure the 2.5-inch drive mount is seated properly before continuing. You will hear some snaps as the mounts fall into place. Replace the back panel by applying pressure around the edges and in the center. Screw in the fastener at the end of the M.2 SSD section. Insert the new M.2 SSD into the slot, keeping the flat side down. If you're replacing an old M.2 SSD, remove it at this time by pulling it away from the slot. Unscrew the fastener at the end of the M.2 SSD section. Be careful to remove the 2.5-inch storage mount from the back panel to avoid damage. Remove the back panel entirely from the laptop. Using a pry tool will make the job far easier. Pry up the back panel, starting with a corner and carefully working your way around the edges. Unscrew the 15 fasteners holding the plastic back panel of the laptop in place.
Unscrew the four fasteners holding the 2.5-inch SSD mount in place. Pry up the panels with a finger or pry tool to remove them from the laptop. Unscrew the fasteners holding the two easy-access panels in place using a Philips-head screwdriver. Once you've figured out which Nitro 5 configuration you're dealing with and you've completed any necessary cloning steps, you can go ahead with the following steps.
#NITRO READER 5 INSTRUCTIONS UPGRADE#
If your Nitro 5 shipped with an M.2 SSD to begin with (which means it contains Windows 10 files), you'll want to clone the old SSD over to the new M.2 SSD using an external enclosure before going through with the physical upgrade steps below.
#NITRO READER 5 INSTRUCTIONS INSTALL#
Alternatively, you can do a fresh install of Windows 10, or you can restore a system image on the new SSD. Install the M.2 SSD using the steps below and after that follow our cloning guide to get the job done with Macrium Reflect. Cloning works exceptionally well in this case, and you won't need to invest in an extra external enclosure. If your Nitro 5 came with only an HDD and you add an M.2 SSD, you'll likely want to transfer Windows 10 over to the speedier SSD for faster boot times and better overall performance. Depending on your configuration, there are a few methods you might want to adopt when upgrading. In our case, the Nitro 5 has only a 1TB HDD, which leaves the M.2 slot completely free. The Nitro 5, in any case, comes with either a lone 2.5-inch 1TB hard-disk drive (HDD), a 2.5-inch 1TB HDD coupled with a 128GB M.2 SSD, or a lone 256 GB M.2 SSD with no extra HDD. In the case of a SATA M.2 SSD, Samsung's 860 EVO is a top choice and is available in a number of storage sizes.
Bottom line here is to fully research your unit's model number to see if it does support NVMe PCIe or strictly SATA like the AN515-42. Acer doesn't exactly make it easy to determine what's supported and what isn't, and I had to do a bunch of digging in various forums to get something that resembled a straight answer. We're using an Acer Nitro 5 with model number AN515-42 for this guide, which apparently doesn't support NVMe PCIe drives. Consider investing in an anti-static wristband to avoid unnecessary damage. You'll also want to ensure you're not working in a static-filled environment, as it can cause damage to a PC's internal hardware. Note: Before beginning any upgrades on a PC, it's a good idea to back up your data in the unlikely event something should go wrong.
#NITRO READER 5 INSTRUCTIONS HOW TO#
How to upgrade the M.2 SSD in your Acer Nitro 5 Amazon: Rosewill anti-static wristband ($6).Amazon: DMLIANKE aluminum SSD enclosure ($23).
#NITRO READER 5 INSTRUCTIONS SOFTWARE#
Hardware and software to get the job done If you're wondering exactly how to go about adding or upgrading the M.2 SSD, we've created this step-by-step guide to help you along. Acer's Nitro 5, a budget gaming laptop available with AMD or NVIDIA graphics, can be upgraded after purchase in order to boost RAM or storage, including an M.2 solid-state drive (SSD).
0 kommentar(er)
